Wireless Lavalier Microphone  EW D1-ME 2
 Wireless Lavalier Microphone  EW D1-ME 2
 Wireless Lavalier Microphone  EW D1-ME 2
 Wireless Lavalier Microphone  EW D1-ME 2

Sennheiser
Wireless Lavalier Microphone
EW D1-ME 2

Brand - Sennheiser


AED 1,969.00

Including VAT





Sennheiser Wireless Lavalier Microphone EW D1-ME 2

Evolution wireless D1 Lavalier-Set with ME 2 lavalier microphone for live stage use.

Sennheiser evolution wireless EW D1-ME 2 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. EW D1-ME 2 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.

  • Unobtrusive professional clip-on microphone

  • Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band

  • Automatic frequency management

  • Prevents interference: Intelligent channel back-up allows co-existence with Wi-Fi & Bluetooth

  • Audio effects: equalizer, de-esser, automatic gain control

  • iOS app for remote control and monitoring of the system

  • Sturdy metal housing

What's in the box?

  • EM-D1 rackmount receiver
  • SK-D1 bodypack transmitter
  • ME 2 clip-on microphone
  • NT-12 power supply
  • Transport Case
  • User Manual

 

SK D1
Microphone 50 to 20,000 Hz 2.2 V RMS
Weight approx. 85 g
RF output power adaptive, up to 100 mW (country-specific)
Battery Specification 2 x AA size battery (1,5V)
Input impedance 1 MΩ
Connection 3.5 mm jack socket, lockable
Line 20 to 20,000 Hz 3.3 V RMS
Input sensitivity automatic sensitivity adjustment
Accupack BA 30 (Li-Ion, 3.7V)
ME 2
Microphone pre-polarized condenser
Max. sound pressure level 130 dB SPL
Pick-up pattern omni-directional
Sensitivity 20 mV/Pa
System
THD, total harmonic distortion typ. < 0,1 %
Storage temperature – 20 °C to +70 °C (The temperature range is influenced by the battery characteristics)
Operating temperature – 10 °C to +55 °C
Signal-to-noise ratio ≥ 105 dB (A)
RF frequency range 2,400 to 2,483.5 MHz
Modulation GFSK with back channel
Dynamic range > 135 dB (A)
Audio sampling 24 bit/48 kHz
Transmission method TDMA, time diversity, frequency diversity, fast switching antenna diversity
Latency 3.9 ms
Audio codec APT-X Live
AF frequency response 20 to 20.000 Hz
EM D1
Weight approx. 824 g
Audio output Mic/line level switch –24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu
RF output power back channel 10 mW/100 mW (country-specific)
Power supply 12 V DC hollow jack
Antenna connector 2 x Rev-SMA
Current consumption 350 mA
Low-cut filter –3 dB at 120 Hz
RF sensitivity <-90 dBm
Connection XLR/¼" (6.3 mm) jack
Equalizer 7-band graphic equalizer
Automatic gain control (AGC) compression/expansion with automatic make-up gain function
Display OLED
Network socket RJ45
Network protocol Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6

Add a Review