Dynacord POWERMATE PM600-3
Dynacord POWERMATE PM600-3
Dynacord POWERMATE PM600-3
Back to Dynacord

Dynacord
POWERMATE
PM600-3

Brand - Dynacord


AED 8,483.00

Call us for Special Offer





Dynacord POWERMATE PM600-3

8-CHANNEL COMPACT POWER-MIXER

  • Intuitive mixer section:8 input channels with 4 Mic/Line, 2 Mic/Stereo-Line/USB, 2 Stereo-Line inputs
  • Very powerful, amplifier (2 x 1.000W/4Ω, 2 x 1.350/2,7Ω) with sophisticated protections
  • 2 High-Quality FX processors, editable with 100 factory and 20 user presets
  • Professional 4x4 24-bit/96kHz USB interface, recording software and MIDI interface for FX control
  • Stereo EQ for the main mix
  • First-class components ( e.g. ALPS faders and potentiometers)
  • Large, contrast rich OLED display
  • Lightweight (9,5kg) road-ready package with extra robust cover-lid
  • The MIC/LINE Channels

  • The DIGITAL AUDIO Interface

  • Master

  • Stereo Effects and Processing

  • Professional Digital High Performance Power Amplifier

  • Transportation and Accessories

This extremely compact powered mixer has a total output of more than 2,000 watts. It is far and away the most powerful compact mixer on the market, yet it weighs only 9kg! With its very lavish feature set and exemplary versatility it is the ideal choice for all professional applications in which few channels yet very high audio quality are required.

Performance without compromises

The most powerful compact powered mixer. Unique. PM600-3

DIM 30 <0.05%
Crosstalk < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB
Frequency Response (-3 dB) Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz
Signal-to-Noise Ratio (A-weighted) 105dB
Power Requirement 100V to 240 VAC, 50Hz to 60Hz
Power Consumption 450W
Cooling Continuous speed controlled Fans
Height 161.7mm (6.37")
Width 438.8mm (17.28")
Depth 362.5mm (14.27")
Weight Net 9.5kg (20.94 lbs)
Auxiliarys (MON, FX, AUX) 1 Pre, 1 Post, 1 Pre/Post switchable
Channels 4
CMRR, MIC input, 1 kHz >80dB
Digital Audio Interface Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
Displays 128 x 64 pixels, OLED
Effects Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Equalization LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5
Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130dBu
Filter LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz <0.15%
Input Connections 6
Input Impedances MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀
Input Sensitivity MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
Maximum Output Voltage 74 Vrms
Maximum SPL MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBudB
MIDI Interface 5-pin DIN connector, In / Out
Noise, Channel inputs to Master A L/R outputs, A-weighted Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu
Operating Temperature Range +5 °C…+40 °C (40 °F…105 °F)
Output Impedances Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω
Output Power Control (Speaker Protection) Adjustable longterm RMS Limiter
Output Stage Topology, amplifier Class D
Phantom Power 48VDC
Protection Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW
Safety Class I
Shipping Weight 12kg (26.46 lbs)
Total Harmonic Distortion MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%%

Add a Review

Related Products