Dynacord POWERMATE PM1000-3
Dynacord POWERMATE PM1000-3
Dynacord POWERMATE PM1000-3
Back to Dynacord

Dynacord
POWERMATE
PM1000-3

Brand - Dynacord


AED 12,378.00

Call us for Special Offer





Dynacord POWERMATE PM1000-3

10-CHANNEL COMPACT POWER-MIXER

  • Intuitive mixer section: 10 input channels with 6 Mic/Line, 4 Mic/Stereo-Line
  • Very powerful amplifier (2 x 1.000W/4Ω, 2 x 1.350/2,7Ω) with sophisticated protections.
  • 2 High-Quality FX processors, editable with 100 factory and 20 user presets
  • Professional 4x4 24-bit/96kHz USB interface, recording software and MIDI interface for FX control
  • Stereo EQ for the main mix
  • First-class components ( e.g. ALPS faders and potentiometers)
  • Large, contrast rich OLED display
  • Lightweight (14kg) road-ready package with extra robust cover-lid
  • MIC/LINE Input Channels

  •  
  • Stereo MIC/LINE Input Channels

  • Master

  • Digital USB 2.0 4x4 Audio Interface

  • Professional Effects, OLED Display and Processing Menus

  • Processing Menu

  • Professional Class-D High-Performance Power Amplifiers

  • Innovative Solution for Protection and Transportation

With more than 2000 watts of output power, this compact powered mixer is by far the most powerful and best equipped compact powered mixer on the market, at only 12kg! With its very lavish feature set and exemplary versatility it is the ideal choice for all professional applications in which 10 input channels at a very high audio quality are required.

Performance without compromises

The most powerful, complete powered mixer. Unique. PM1000-3

DIM 30 <0.05%%
Crosstalk < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB
Frequency Response (-3 dB) Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz
Signal-to-Noise Ratio (A-weighted) 105dBdB
Power Requirement 100V to 240VAC, 50Hz to 60Hz
Cooling Continuous speed controlled Fans
Height 164.5mm (6.48")
Width 510.5mm (20.1")
Depth 571.5mm (22.5")
Weight Net 14kg (30.86 lbs)
Auxiliarys (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable
Channels 6
CMRR, MIC input, 1 kHz >80dB
Digital Audio Interface Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
Displays 128 x 64 pixels, OLED
Effects Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Equalization LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130dBu
Filter LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz <0.15%
Input Impedances MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Input Sensitivity MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
Maximum Output Voltage 74 Vrms
Maximum SPL MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB
MIDI Interface 5-pin DIN connector, In / Out
Noise, Channel inputs to Master A L/R outputs, A-weighted Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu
Operating Temperature Range +5 °C…+40 °C (40 °F…105 °F)
Output Impedances Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
Output Power Control (Speaker Protection) Adjustable longterm RMS Limiter
Output Stage Topology, amplifier Class D
Phantom Power 48VDC
Protection Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW
Safety Class I
Shipping Weight 17kg (37.48 lbs)
Total Harmonic Distortion MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%%

Add a Review

Related Products